Bracelet Adjustment Instructions
All watches come with a watch tool set which includes a screwdriver, pin pusher tool, and microfiber cloth. These are required to help you remove links and adjust your watch bracelet size as needed. We've put together a step by step guideline below to help you along the way.
For all Oyster and Jubilee Bracelets:
Step 1. Determine the number of extra links to be removed for your wrist size. Then, use the included screwdriver to unscrew the screw(s).
Step 2. Use the included double-sided pin tool to remove the screw pin from the bracelet (one side removes the spring pins and the other side pushes). Optional: Use needle nose pliers (not included) to help with pin removal. Remove as many links for desired fitment. Replace the pin(s) and fully screw back into place.
Step 1. Begin by pulling firmly on the link nearest to the clasp until it lifts.
Step 2. Next, slide the link inward or outward into the clasp to adjust the size.
Step 3. After adjusting, press the link securely back into the clasp.
For all Rubber Bracelets:
Step 1. First locate the pin and then remove the push pin with the provided tool.
Step 2. Once the pin is removed, there are adjustment notches on the clasp. Find the notch that would suit your wrist size. For the perfect fit you can also move the push pin to different locations on the band.
Step 3. To install the push pin back on the clasp, insert the bottom end of the push pin into the notch and push the top side of the pin into the aligned top notch.
Step 4. Make sure you pull on the band slightly to make sure the pin is fully inserted in the clasp before wearing the watch to make sure the strap is secured.